Black banner

AD30 Underground Mining Truck

AD30 Underground Mining Truck

The Cat® AD30 Underground Truck is a medium to smaller mine hauler that is a perfect match to the Cat R1600H underground loader. Engineered for performance, it’s powered by the Cat C15 engine and delivers fast cycle times and maximum efficiency. With two body styles plus multiple body sizes, you can choose the right body to maximize efficiency in your application. The cab is ergonomically designed to keep operators safe, comfortable and in control. Rugged construction and easy maintenance guarantee long life with low operating costs.

Engine

Engine Model

Cat® C15

Engine Power - Tier 3 Engine - ISO 14396:2002

401hp

Engine Power - VR Engine - ISO 14396:2002

401hp

Bore

5.4in

Stroke

6.8in

Displacement

928in³

Note (1)

Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.

Note (2)

All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat

Note (3)

Engine derate will commence at an altitude of 2743 m (8,999 ft).

Note (4)

Optional Ventilation Reduction package available.
Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available.

Note (5)

Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.

Operating Specifications

Nominal Payload Capacity

66139lb

Gross Machine Mass

132300lb

Body Capacities

11.3-17.5 m³ (14.8-22.9 yd³)

Body Capacities

Body 1

14.8yd³

Body 2 - Standard Body

18.8yd³

Body 3

22.9yd³

Wide Body

21.9yd³

Ejector Body (1)

19.9yd³

Ejector Body (2)

21.9yd³

Note

Heaped SAE 2:1.

Weight Distribution

Empty - Front Axle

67.50%

Empty - Rear Axle

32.50%

Loaded - Front Axle

44.20%

Loaded - Rear Axle

55.80%

Weights

Empty

63647lb

Empty - Front Axle

42944lb

Empty - Rear Axle

20704lb

Loaded

132277lb

Loaded - Front Axle

58451lb

Loaded - Rear Axle

73826lb

Body Hoist

Raise

10.5s

Lower

11.2s

Total Cycle Time

21.7s

Turning Dimensions

Outside Clearance Radius

337.4in

Inner Clearance Radius

198in

Articulation Angle

42.5°

Frame Oscillation

10 Degrees

Transmission

Forward - 1

3.9mile/h

Forward - 2

7mile/h

Forward - 3

12.9mile/h

Forward - 4

22.8mile/h

Reverse - 1

4.4mile/h

Note

Maximum travel speeds with standard 26.5 × R25 tires.

Service Refill Capacities

Engine Crankcase - With Filter

9gal (US)

Transmission

18gal (US)

Hydraulic Tank

38gal (US)

Cooling System

20gal (US)

Front Differential and Final Drives

15gal (US)

Rear Differential and Final Drives

15gal (US)

Fuel Tank

108gal (US)

Tires

Tire Size

26.5 × R25

Final Drives

Differential Ratio

3.38:1

Final Drive Ratio

4.76:1

Total Reduction Ratio

16.13:1

Note

Fully floating axles.

Standards

Standards

ROPS/FOPS Certified Cab

Standard Equipment:

  • Tires, Rims, And Wheels
    • Tires must be selected from the Mandatory Attachments section. Choose from below:
      – Tire, 26.5 × 25 VSNT Bridgestone
      – Tire, 26.5 × 25 VSDL Bridgestone
    • Rims (set of four) – five pieces, tubeless
  • Electrical
    • 12V power supply in cab
    • Alarm, reversing
    • Alternator, 95 amp
    • Battery disconnect switch, ground level
    • Circuit breaker, 80-amp
    • Corrosive protection spray
    • Diagnostic connector
    • Disconnect switch, two post, ground level
    • Lights:
      – Headlights with dimmer switch
      – Brake and tail lights
      – Reversing lights, automatic when reverse gear selected
      – Work light, rear, cab mounted
    • Low maintenance batteries
    • Receptacle group, auxiliary start
    • Shutdown switch, ground level
    • Starting and charging system
  • Operator Environment
    • Cab, ROPS/FOPS certified
    • Open operator station ROPS/FOPS structure
    • Caterpillar Electronic Monitoring System (CEMS), dash instrument panels
    • Operator Presence System
    • Automatic Brake Application (ABA)
    • Electric horns
    • Gauges:
      – Engine coolant temperature
      – Transmission coolant temperature
      – Hydraulic oil temperature
      – Fuel level
      – Speedometer
      – Tachometer
    • Indicator lights:
      – Alert warning light
      – Body up position warning
      – High beam
      – Residual brake pressure warning
      – Retarder application
      – Turn signal
    • Low hydraulic level warning
    • Mirrors, rear view
    • Seat, suspension operator seat with retractable seat belt
    • Seat, trainer/passenger with seat belt
    • Steering wheel, tilt/telescopic
  • Power Train
    • Axle, arrangement:
      – Standard width, front – rear
    • Brake retarder control, automatic
    • Brakes:
      – All wheel disc
      – Oil cooled
      – Multiple-disc (SAFR)
    • Control throttle shifting
    • Electric fuel priming pump
    • Engine:
      – Cat C15 six cylinder diesel engine
      – Air-to-air aftercooler (ATAAC)
    • Exhaust, turbo compartment shielding
    • Four wheel drive
    • Gear blockout with tray up, programmable
    • Ground speed limiting, programmable
    • Long life coolant
    • Parking brakes, four wheels
    • Precleaner, engine air intake
    • Radiator, cross flow; Radiator cap manual release
    • Secondary steering system
    • Transmission, automatic planetary power shift (4F/1R)
    • Torque converter with automatic lockup
  • Other Standard Equipment
    • Adapters, oil sample
    • Alarm, tray up
    • Body dump and ejector:
      – Dump, (14.4 m3/18.8 yd3)
    • Cap, radiator, manual release
    • Catalytic exhaust purifier/muffler group
    • Centralized lubrication points
    • Fenders:
      – Front, rear flaps
    • Firewall
    • Fuel system manual shut off tap
    • Front rubber bumpers
    • Handholds (access on/off top deck)
    • Handrails
    • Hitch, articulated and oscillated
    • Lifting lugs, frame
    • Lubrication system:
      – Centralized, dump body
    • Operation and Maintenance Manual – English and other applicable local languages to select
    • Scheduled Oil Sampling (S·O·SSM) port:
      – Coolant
      – Engine oil
      – Hydraulic oil
      – Transmission oil
    • Spill guard, front, for body
    • Swing out radiator grill
    • Tow pin, front and rear

Optional Equipment:

  • Power Train
    • Axle, arrangement:
      – Wide body, front – rear
    • Brake pressure gauges
    • Engine options:
      – Engine, Ventilation Reduction (VR)
      – Equivalent to Tier 3
    • After treatment options (for use with VR engine only) Diesel Particulate Filter (DPF) (flow through) filter
    • Fast Fill System:
      – Coolant
      – Engine oil
      – Fuel (dual tanks)
      – Hydraulic oil
      – Transmission oil
    • Park Brake Switch Engagement – Push to Apply/Pull to Apply
  • Electrical
    • Battery shutdown:
      – Ground Level Isolation, In Cab Isolation Switch
      – Ground Level Isolation, Engine Shutdown Switch
      – Ground Level Isolation, In Cab Isolation, Engine Shutdown Switch
    • Lights:
      – Headlights with dimmer switch, LED
      – Reversing lights, automatic when reverse gear selected, LED
      – Work light, rear, cab mounted, LED
  • Operator Environment
    • Operator’s station ROPS/FOPS enclosed:
      – Air conditioning
      – Cab pressurizer and filter
      – Dome light
      – Heater
      – Radio ready compartment for radio and speakers
      – Sun visor
      – Window, sliding cab door
    • Seat:
      – Suspension seat Cat Comfort TLV2, vinyl
      – Suspension seat tee, mechanical
    • Seat cover:
      – Tee and Cat Comfort TLV2
      – Seat cover, companion
  • Technology
    • Vital Information Management System (VIMS) Gen 3
    • Payload:
      – Truck Payload Measurement System (TPMS)
  • Tires, Rims, And Wheels
    • Rim identification numbering
    • Spare rim, tubeless
  • Other Optional Equipment
    • Body dump and ejector:
      – Dump, (11.3 m3/14.8 yd3)
      – Dump, (16.8 m3/21.9 yd3) (wide body configuration)
      – Dump, (17.5 m3/22.9 yd3)
      – Ejector, (15.2 m3/19.9 yd3)
      – Ejector, (16.8 m3/21.9 yd3)
    • Body liners, impact and/or wear
    • Camera – color rear facing
    • Cover, anti vandalism for shipping
    • Fenders:
      – Wide body, front, rear flaps
    • Fire suppression system:
      – Foam, water based
    • Fluids:
      – Arctic fuel
      – Arctic coolant
    • Lubrication system:
      – Automatic, dump or ejector body
      – Centralized, ejector body
    • Mine transfer
    • Reflective tapes
    • Service tools

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.