Gas Generator G3516B

Standard Equipment:

• Air Inlet

  • Single element canister type air cleaner with service indicator
  • Modular air cleaner, single element service indicator

• Control Panel

  • EMCP 4.3

• Cooling

  • CAT flange connections
  • Engine driven water pumps for jacket water and aftercooler
  • Jacket water and SCAC thermostats

• Circuit Breaker

  • Left, Right, or Rear-Mounted
  • 1600A-2000A, 3-Pole UL Rated Circuit Breakers

• Exhaust

  • Provides exhaust port temperatures and stack temperature to customer supplied screen via CCM
  • Dry exhaust manifolds, insulated and shielded
  • CAT flanged faced outlets

• Fuel System

  • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
  • 24V DC engerized-to-run gas shutoff valve
  • Throttle plate, hydraulically actuated and controlled by GECM

• Fuel System

  • Electronic fuel metering valve
  • Gas shutoff valve
  • Electric air-fuel ratio control

• Ignition System

  • Individual Cylinder Detonation Sensitive Timing (DST)�
  • Electronic Ignition System (controlled by GECM)

• Generator

  • Stator RTDs
  • Form would stator
  • Permanent magnet excitation
  • IEC Platinum stator RTDs
  • Caterpillar's digital voltage regulator (CDVR) with droop capability, 3-phase sensing, KVAR/PF modes
  • Anti-condensation space heater
  • Winding temperature detectors

• Govrerning System

  • HV Load share module

Optional Equipment:

• Air Inlet

  • Air inlet adapters- rectangular or round

• Circuit Breaker

  • 3 Pole UL 489 Listed
  • 3 Pole IEC 947-2 Rated
  • 1200A, 1600A, 2000A, 2500A, 3200A circuit breaker with shunt trip and auxiliary contacts

• Control Panel

  • Local alarm module
  • PL1000E/PL1000T communications module
  • Synchronizing module
  • Engine failure relay
  • Remote annuciator
  • Customer Interface Module

• Cooling

  • Flexible connection for jacket water inlet and outlet

• Exhaust

  • 203mm/305mm Elbow
  • Flexible Fitting (203mm)
  • Flange
  • 15 dBA, 356mm (14 in) muffler attenuation
  • Exhaust Expander

• Fuel System

  • Fuel filter/ Gas filter
  • 206-412 kPa (30-60psi) gas knockdown regulator

• Generator

  • Generator air filter
  • Low voltage extension box
  • 2400V delta conversion
  • Medium and high voltage generators and attachment
  • Manual voltage control
  • Bearing temperature detectors
  • 3-phase, 380/480/600/4160V @ 1800rpm generator (60 Hz)
  • European bus bar
  • Cable access box

• General

  • Digital diagnostic tool
  • US AID Emblem
  • Tool set
  • Special paint order

• Starting/charging

  • Charging alternator
  • 10A/20A Battery charger
  • Jacket water coolant heater
  • Electric starting motor LH
  • 24V Battery Set