930M Waste Handler Small Wheel Loader
The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
Engine
Maximum Gross Power
Bore
Stroke
Displacement
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
Engine Power - ISO 14396 - Metric
Engine Power - ISO 14396:2002
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
Net Power (Standard Power Mode: Range 1-3*)
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
Net Power (Performance Power Mode: Range 1-4)
Note (3)
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
Emissions
Engine Model
Note (1)
Note (2)
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
Weights
Operating Weight
Note (2)
Note (1)
Operating Weight (1)
Operating Weight (2)
Buckets
Bucket Capacities
Cab
ROPS
FOPS
Note (1)
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
Service Refill Capacities
Hydraulic System - Including Tank
Axles - Front
Axles - Rear
Diesel Exhaust Fluid (DEF) Tank
Cooling System
Engine Crankcase
Hydraulic Tank
Transmission - Gear Box
Fuel Tank
Sustainability
Recyclability
Loader Hydraulic System
Lift Cylinder: Standard Lift Linkage - Stroke
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
Lift Cylinder: Standard Lift Linkage - Bore Diameter
Lift Cylinder: Standard Lift Linkage - Rod Diameter
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
Tilt Cylinder: Standard Lift Linkage - Stroke
Relief Pressure - Tilt Cylinder
Maximum Flow - Implement Pump
Maximum Working Pressure - Implement Pump
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
Note (1)
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
Note (2)
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
Note (3)
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
Operating Specifications
Note (2)
Note (1)
Full Turn Tip Load (2)
Full Turn Tip Load (1)
Air Conditioning System
Air Conditioning
Steering
Steering Cylinder, Double Acting - Bore Diameter
Steering Cylinder, Double Acting - Rod Diameter
Maximum Steering Torque - 0° (Straight Machine)
Steering Cylinder, Double Acting - Stroke
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
Maximum Working Pressure - Steering Pump
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
Maximum Steering Torque - 40° (Full Turn)
Note (1)
Note (2)
Maximum Flow - Steering Pump
Transmission
Forward and Reverse - Range 4
Forward and Reverse - Range 3
Forward and Reverse - Range 2
Note
Forward and Reverse - Range 1*
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
Note (3)
Note (2)
Rear Axle
Front Axle
Brakes - Parking
Note (1)
Front Axle - Traction Aid
Rear Axle - Traction Aid - Optional
Brakes - Service
Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder
Standard Equipment:
-
- Power Train
-
- Axle Duo-Cone™ seal guards
- Auto idle shut down feature
- Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life) - Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed - Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Oil sampling ports
- Throttle lock and max speed limiter
-
- Hydraulics
-
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Seat-mounted hydraulic joystick controls
-
- Electrical
-
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Emergency shutdown switch
- Halogen work and roading lights, LED rear tail lights
- Product Link PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
-
- Operator Environment
-
- 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- Cab, pressurized
- Camera, rearview
- External heated mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Mirror, single
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Suspension seat, fabric
-
- Other Standard Equipment
-
- Large-access enclosure doors with adjustable close/open force
- Cat optimized Z-bar linkage with parallel lift
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures
Optional Equipment:
-
- Optional Equipment
-
- Autolube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Differential, limited slip, rear
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages) - Camera, roof mounted, front view with separate display
- Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total) - Counterweight, additional options
- Coupler, (Fusion and ISO 23727)
- Debris packages (low, medium, high)
- Fenders (extended cover and full coverage)
- Guarding packages
- Linkage, high lift
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer - Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Rear Object Detection
- Ride Control System, adjustable through secondary display
- Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest. - Steering
– Dual mode and secondary - Tire Pressure Monitoring (TPM)
Contact Us
Get A Quote
Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.