962M Wheel Loader | Front Loader | Tier 4
The 962M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine deliversthe reliability, durability, and versatility you’ve come to expect from a Cat machine.
Engine
Net Power - ISO 9249
Emissions
Maximum Power - 2,100 rpm - SAE J1995
Maximum Net Power - 2,100 rpm - ISO 9249
Maximum Power - 2,100 rpm - ISO 14396 - Metric
Maximum Net Torque - 1,350 rpm
Maximum Power - 2,100 rpm - ISO 14396
Maximum Net Power - 2,100 rpm - SAE J1349
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
Displacement
Peak Gross Torque - 1,350 rpm - ISO 14396
Peak Gross Torque - 1,350 rpm - SAE J1995
Engine Model
Note
Weights
Operating Weight
Note
Buckets
Bucket Capacities
Dimensions - High Lift
Rack Back - Maximum Lift
Hinge Pin Height at Carry Height
Wheel Base
Height - Top of Exhaust Pipe
Centerline of Rear Axle to Hitch
Centerline of Rear Axle to Edge of Counterweight
Tread Width
Height - Top of ROPS
Ground Clearance
Height - Top of Hood
Maximum Width - Over Tires - Loaded
Lift Arm Clearance at Maximum Lift
Note
Hinge Pin Height at Maximum Lift
Overall Length - Without Bucket
Rack Back at Ground
Rack Back - Carry Height
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
Note (3)
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
Note (2)
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
Note (1)
Dimensions - Standard Lift
Tread Width
Centerline of Rear Axle to Edge of Counterweight
Overall Length - Without Bucket
Ground Clearance
Height - Top of Exhaust Pipe
Rack Back at Ground
Wheel Base
Centerline of Rear Axle to Hitch
Height - Top of Hood
Hinge Pin Height at Carry Height
Maximum Width - Over Tires - Loaded
Hinge Pin Height at Maximum Lift
Height - Top of ROPS
Note
Lift Arm Clearance at Maximum Lift
Rack Back - Maximum Lift
Rack Back - Carry Height
Dimensions
Maximum Width over Tires (loaded)
Centerline of Rear Axle to Edge of Counterweight
Wheel Base
Hinge Pin Height at Carry Height
Ground Clearance
Centerline of Rear Axle to Hitch
Tread Width
Height - Top of Exhaust Pipe
Height - Top of ROPS
Overall Length (without bucket)
Note
Hinge Pin Height at Maximum Lift
Lift Arm Clearance at Maximum Lift
Height - Top of Hood
Operating Specifications
Note (2)
Static Tipping Load - Full 40° Turn - With Tire Deflection
Breakout Force
Static Tipping Load - Full 40° Turn - No Tire Deflection
Note (1)
Hydraulic System
Implement Pump Type
Hydraulic Cycle Time - Total
Implement System - Maximum Operating Pressure
Implement System - Maximum Pump Output at 2,150 rpm
Service Refill Capacities
Hydraulic Tank
Fuel Tank
Crankcase
Differential - Final Drives - Front
DEF Tank
Differential - Final Drives - Rear
Transmission
Cooling System
Transmission
Forward - 1
Forward - 3
Reverse - 2
Note
Reverse - 1
Forward - 2
Forward - 5
Forward - 4
Reverse - 3
Bucket Capacities
Bucket Range
Engine - Tier 4 Final/Stage IV
Emissions
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Engine, Cat C7.1 meets Stage IV emission standards
- Cat Clean Emissions Module (CEM) with Diesel Particulate Filter (DPF) and Diesel Exhaust Fluid (DEF) tank and pump
- Fuel priming pump (electric)
- Fuel/water separator
- Precleaner, engine air intake
- Economy Mode (selectable)
- Transmission, automatic counter shaft power shift (5F/3R)
- Torque converter, locking clutch with free wheel stator
- Switch, transmission neutralizer lockout
- Axles, manually actuated differential lock front axle, open differential rear axle
- Axles, ecology drains
- Brakes, full hydraulic enclosed wet-disc with Integrated Braking System (IBS)
- Brake wear indicators
- Parking brake, disc and caliper
- Fan, radiator, electronically controlled, hydraulically driven, temperature sensing, on demand
- Radiator, high debris with wide fin spacing
-
- Operator Environment
-
- Cab, pressurized and sound suppressed (ROPS/FOPS)
- Viscous mounts
- Multi-function 18 cm color LCD touch-screen display for rear vision camera image display (reverse travel activated) and machine status, setting and health parameters
- EH controls, SAL (single axis lever) lift and tilt function
- Steering, steering wheel
- Radio ready (entertainment) includes antenna, speakers and converter (12V, 10-amp)
- Air conditioner, heater, and defroster (auto temp and fan)
- EH parking brake
- Beverage holders (2) with storage compartment for cell phone/MP3 player
- Bucket/work tool function lockout
- Coat hook (2)
- Cab air filter
- Ergonomic cab access ladders and handrails
- Horn, electric
- Light, two dome (cab)
- Mirrors, rearview external with integrated spot mirrors
- Post mounted membrane 16 switch keypad
- 2 receptacles, 12V
- Seat, Cat Comfort (cloth) air suspension
- Seat belt, 51 mm retractable, with indicator
- Sun visor, front
- Wet-arm wipers/washers front and rear, intermittent front wiper
- Window, sliding (left and right sides)
- Cab tie-off
-
- Computer Monitoring System
-
- With following gauges: Speedometer/tachometer; Digital gear range indicator; Diesel Exhaust Fluid (DEF) level; Temperature: engine coolant, hydraulic oil, transmission oil; Fuel level
- With following warning indicators: Temperature: axle oil, engine intake manifold; Pressure: engine oil, fuel pressure hi/low, primary steering oil, service brake oil; Battery voltage hi/low; Engine air filter restriction; Hydraulic oil filter restriction; Hydraulic oil low; Parking brake; DEF low level; Transmission filter bypass
-
- Electrical And Lighting
-
- Batteries (2), maintenance free 1,400 CCA
- Ignition key; start/stop switch
- Starter, electric, heavy duty
- Starting and charging system (24V)
- Lighting system: Four halogen work lights (cab mounted); Two LED stop, turn, tail lights; Two halogen roading lights (with signals); Two halogen rear vision lights (hood mounted)
- Alarm, back-up
- Alternator, 145-amp brushed
- Main disconnect switch
- Receptacle start (cables not included)
- Secondary steering
-
- Cat Connect Technologies
-
- Link technologies: Product Link
- Detect technologies: rear vision camera
-
- Linkage
-
- Linkage, optimized Z-bar, cast crosstube/tilt lever
- Kickout, lift and tilt, automatic (adjustable in cab)
-
- Hydraulics
-
- Hydraulic system, load sensing
- Steering, load sensing
- Ride control, 2V
- Remote diagnostic pressure taps
- Hoses, Cat XT™
- Couplings, Cat O-ring face seal
- Hydraulic oil cooler (swing out)
- Oil sampling valves
-
- Fluids
-
- Premixed extended life coolant with freeze protection to -34° C
-
- Other Standard Equipment
-
- Hood, non-metallic power tilting
- Service centers (electrical and hydraulic)
- Auto idle shutdown
- Fenders with mud-flap/rear with extension
- Ecology drains for engine, transmission, and hydraulics
- Grill, airborne debris
- Filters: fuel, engine air, engine oil, hydraulic oil, transmission
- Fuel cooler
- Grease zerks
- Hitch, drawbar with pin
- Precleaner rain cap
- Sight gauges: engine coolant, hydraulic oil, and transmission oil level
- Toolbox
- Vandalism protection caplocks
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Axles: Automatic front/rear differential locks; Axle oil cooler; Seal guards
- Fan, VPF (variable pitch fan), automatic and manual control
- Radiator, high debris with wider fin spacing
-
- Operator Environment
-
- Door, remote opening system
- Cover, HVAC metallic
- EH controls, SAL 3rd function - Additional roller switch for 4th function
- EH controls, joystick lift and tilt - Additional integrated roller switches for 3rd and 4th functions
- Filter, carbon fresh air
- Mirrors, heated rearview external with integrated spot mirrors
- Precleaner, HVAC
- Precleaner, HVAC (RESPA)
- Radio, AM/FM/CD/USB/MP3 Bluetooth
- Radio, CB ready
- Seat, heated air suspension
- Seat belt, 4 point harness, with indicator
- Steering, EH joystick, speed sensing with force feedback
- Roof, metallic
- Sun visor, rear
- Windows, rubber mounted
- Windows, with front guard
- Windows, with full guards front, rear and sides
- Full time rear vision display Work Area Vision Systems (WAVS)
- Cat seat cover, removable
-
- Electrical And Lighting
-
- Four additional halogen cab mounted work lights or;
- Two additional auxiliary front HI LED and two additional auxiliary rear LED cab mounted work lights, two LED work lights in the radiator grill, LED front turn signals, replacement of the standard four halogen cab mounted work lights with four LED work lights, LED roading lights
- Warning amber strobe beacon
- Reversing strobes
- Speed limiter 20 km/h
- External seat belt indicator light
-
- Starters, Batteries, And Alternators
-
- Cold start - 240V
-
- Cat Connect Technologies
-
- Link technologies: VIMS™
- Payload technologies: Cat Production Measurement 2.0 (CPM); Printer, Cat Production Measurement; Aggregate Autodig
- Advanced Productivity subscription
- Detect technologies: Cat Rear Object Detection
- Machine Security System
-
- Linkage
-
- High lift
- Forestry
- Quick coupler ready
-
- Work Tools
-
- Performance Series buckets
- Fusion quick coupler, ISO coupler
- Forks, pallet
- Forks, logging
-
- Hydraulics
-
- 3rd function with Ride Control: Standard linkage; High lift linkage; Forestry linkage
- 4th function with Ride Control: Standard linkage; High lift linkage; Forestry linkage
-
- Fluids
-
- Premixed extended life coolant with freeze protection to -50° C
- Bio-degradable oil, Cat HYDO™
-
- Other Optional Equipment
-
- Cat Autolube System
- Fenders, roading
- Guard, power train
- Precleaner, turbine
- Precleaner, trash
- Platform, window washing
- Cold weather package: Transmission filter by pass; Fan pump bypass; Jacket water or engine block heater; Ether aid ready
-
- Purpose Built Specialty Models
-
- Industrial & Waste
- Forestry
- Corrosion Resistance
Contact Us
Get A Quote
Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.