990K Millyard Arrangement Wheel Loader
Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely. The 990K Millyard Arrangement is designed to meet the demands of millyard applications. The features of the 990K Millyard work together to provide a durable and reliable machine to meet the needs of the modern millyard.
Engine
Net Power
Engine Model
Bore
Stroke
Displacement
Torque Rise
Rated Speed
Rated Speed - Gross - ISO 14396
Gross - ISO 14396
Rated Speed - Net Power - SAE J1349 - Standard Ambient
Rated Speed - Net Power - SAE J1349 - High Ambient
Peak Torque - 1,200 rpm
Rated Speed - Gross - SAE J1995
Emissions
Net Power - SAE J1349
Operating Specifications
Operating Weight
Tipping Load - Straight
Tipping Load - Articulated 35°
Transmission
Transmission Type
Forward - 1
Forward - 2
Forward - 3
Reverse - 1
Reverse - 2
Reverse - 3
Direct Drive - Forward 3
Direct Drive - Forward 1
Direct Drive - Reverse 3
Direct Drive - Reverse 1
Direct Drive - Reverse 2
Direct Drive - Forward 2
Note
Axles
Front
Rear
Oscillation Angle
Hydraulic Cycle Times
Raise
Dump
Lower Float Down
Lower
Rack Back
Service Refill Capacities
Fuel Tank
Cooling System
Transmission
Hydraulic Tank - Steering and Braking
Differential - Final Drives - Rear
Differential - Final Drives - Front
Hydraulic Tank - Implement and Hydraulic Fan
Hydraulic System Factory Fill
Engine Crankcase
Hydraulic System - Lift/Tilt
Maximum Flow at 1,800 rpm (1)
Lift/Tilt System - Circuit
Relief Valve Setting - Lift/Tilt
Maximum Flow at 1,800 rpm (2)
Relief Valve Setting - Main
Pilot System
Lift/Tilt System
Cylinders, Double Acting - Tilt, Bore and Stroke
Cylinders, Double Acting - Lift, Bore and Stroke
Hydraulic System - Steering
Relief Valve Setting - Steering
Maximum Flow at 1,400 rpm
Steering System - Circuit
Total Steering Angle
Steering System - Pump
Sound Performance - Standard
Machine Sound Level (ISO 6395:2008)
Operator Sound Level (ISO 6396:2008)
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008)
Machine Sound Level (ISO 6395:2008)
Dimensions - Millyard Linkage - Approximate
Ground to Top of Exhaust Stacks
Fork Height at Maximum Lift
Ground to Top of Hood
Ground to Top of ROPS
Fork Top Clamp Opening
Maximum Overall Length
Ground to Lower Hitch Clearance
Ground to Bumper Clearance
Fork Height with Level Arms
Front Axle Centerline to Fork Tip
Rear Axle - Centerline to Bumper
Ground to Center of Front Axle
Hinge Pin Height at Maximum Lift
Wheel Base
Dump Angle at Maximum Lift
Forks
Fork End Area
Brakes
Brakes
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- Air conditioner and heater with automatic temperature control
- Cab, sound-suppressed pressurized, protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp)
- 12V power port for mobile phone or laptop connection
- Camera, rear vision
- Cigar lighter and ashtray
- Coat hook
- Electro-hydraulic tilt and lift controls (seat mounted)
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Implement hydraulic lockout
- Instrumentation, gauges: – Engine coolant temperature – Fuel level – Ground speed – Gear – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three category – Automatic transmission model enable status – Brake malfunction – Bucket float status – Delayed engine shutdown status – Engine idle shutdown status – Engine malfunction – Fuel economy mode enable status – Hydraulic lockout – Lockup clutch enable status – Low fuel level – Parking brake status – Rimpull control enable status – Seatbelt warning – Secondary steering (if equipped) – Throttle lock status – Transmission gear
- Keypad, control with indicator lights: – Auto trans mode speed range – Auto/manual transmission mode – Fuel economy mode – Implement kickout – Lockup clutch – Reduced rimpull – Throttle lock
- Light, dome (cab)
- Lunchbox and beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat comfort (cloth) air suspension
- Seat belt, retractable, 76 mm (3 in) wide
- STIC control system with steering lock
- Tinted glass
- Trainer seat with lap belt
- Vital Information Management System (VIMS) 3G with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Payload Control System (PCS): – Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
-
- Power Train
-
- Brakes, full hydraulic, enclosed, oil-disc
- Axle-shaft oil-disc service brake
- Electro hydraulic parking brake
- Case drain filters
- Cat clean emission module (Tier 4 Final only)
- Demand fan
- Engine Cat C27
- Fuel priming pump (electric)
- Ground level engine shutoff, bumper
- Mufflers (under hood) (Tier 2 only)
- Precleaner, engine air intake
- Radiator, Aluminum Modular (AMR)
- Separated cooling system
- Starting aid, (ether) manual override
- Throttle Lock
- Torque Converter, Impeller Clutch with lock-up clutch feature and rimpull control system
- Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
-
- Electrical
-
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance free (2 – 1,400 CCA)
- Converter, 10/15 amp, 24V to 12V
- Deutsch component connectors
- Electrical system, 24V
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
- Starter, electric
- Starter lockout in bumper
- Starting receptacle for emergency start
- Transmission lockout in bumper
-
- Other
-
- Automatic tilt/lift kickouts electronically adjustable from cab
- Axle temperature sensor
- Battery disconnect and jump start receptacle, bumper
- Coupling, Caterpillar O-ring face seals
- Economy mode with on demand throttle
- Emergency platform egress
- Engine, crankcase, 500 hour interval with CH4
- Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
- Fenders, steel (front)
- Guards, crankcase and power train
- Grouped/labeled lube points
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Oil sampling valves
- Positive flow control hydraulic system
- Product Link
- Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
- Venturi stack
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- –50° C (–58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine block heater 120V or 240V
- High ambient cooling – software
-
- Operator Environment
-
- Cab precleaner
- AM/FM/CD/MP3 radio
- Satellite Sirius radio with Bluetooth
- LED warning strobe
- CB radio ready
- Window sun shade
-
- Miscellaneous Attachments
-
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- Axle oscillation stop
- Heavy duty cab mounts
Contact Us
Get A Quote
Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.