986 Wheel Loader
Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
Engine
Engine Model
Peak Power Speed
Peak Power Speed - Gross - SAE J1995
Engine Power - ISO 14396:2002
Net Power - SAE J1349:2011
Rated Speed
Rated Speed - 2,000 rpm - EEC 80/1269
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)
Rated Speed - 2,000 rpm - ISO 9249
Rated Speed - 2,000 rpm - ISO 9249 (DIN)
Bore
Stroke
Displacement
Peak Torque - 1,200 rpm - SAE J1995
Torque Rise
Emissions
Transmission
Transmission Type
Forward - 1
Forward - 2
Direct Drive - Forward 2
Direct Drive - Forward 3
Direct Drive - Forward 4
Reverse - 1
Reverse - 2
Direct Drive - Reverse 2
Direct Drive - Reverse 3
Direct Drive - Reverse 4
Operating Specifications
Operating Weight - Standard
Operating Weight - High Lift
Rated Payload - Standard (Quarry Face)
Rated Payload - Loose Material (Standard)
Rated Payload - High Lift (Quarry Face)
Rated Payload - Loose Material (High Lift)
Bucket Capacity Range
Cat Truck Match - Standard
Cat Truck Match - High Lift
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Lift/Tilt System - Pump
Maximum Flow at 2,165 rpm
Relief Valve Setting - Lift/Tilt
Lift Cylinder - Bore
Lift Cylinder - Stroke
Tilt Cylinder - Bore
Tilt Cylinder - Stroke
Hydraulic Cycle Times
Rack Back
Raise
Dump
Lower
Lower Float Down
Total Hydraulic Cycle Time
Hydraulic System - Steering
Steering System - Circuit
Steering System - Pump
Maximum Flow at 1,400 rpm
Steering Cut Off Pressure
Total Steering Angle
Air Conditioning System
Air Conditioning
Axles
Front
Rear
Oscillation Angle
Oscillation Angle - Chain Arrangement
Brakes
Brakes
Service Refill Capacities
Fuel Tank
Fuel Tank - Short Lift
Cooling Systems
Crankcase
Diesel Exhaust Fluid Tank
Transmission
Axle Oil - Differentials and Final Drives - Front
Axle Oil - Differentials and Final Drives - Rear
Hydraulic System Factory Fill
Hydraulic System - Tank Only
Operator's Cab
ROPS/FOPS
Sound Performance - Standard
Operator Sound Level (ISO 6396)
Machine Sound Level (ISO 6395)
Note
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
Sound Performance - Suppression
Operator Sound Level (ISO 6396)
Machine Sound Level (ISO 6395)
Note
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
Ground to Top of Exhaust Stacks
Ground to Top of Hood
Ground to Center of Front Axle
Ground to Fuel Tank Clearance
Ground to Lower Hitch Clearance
Reach - Maximum Lift
Clearance at Maximum Lift
B-Pin Height - Maximum Lift
Maximum Overall Height - Bucket Raised
Rear Axle - Centerline to Bumper
Wheel Base
Maximum Overall Length
Front Axle Centerline to Bucket Tip
Note
- All dimensions are approximate.
- Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
Ground to Top of Exhaust Stacks
Ground to Top of Hood
Ground to Center of Front Axle
Ground to Fuel Tank Clearance
Ground to Lower Hitch Clearance
Reach - Maximum Lift
Clearance at Maximum Lift
B-Pin Height - Maximum Lift
Maximum Overall Height - Bucket Raised
Rear Axle - Centerline to Bumper
Wheel Base
Maximum Overall Length
Front Axle Centerline to Bucket Tip
Note
- All dimensions are approximate.
- Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS
Ground to Top of Exhaust Stacks
Ground to Top of Hood
Ground to Center of Rear Axle
Ground to Fuel Tank Clearance
Ground to Lower Hitch Clearance
Reach at Maximum Lift
Clearance at Maximum Lift
B-Pin Height at Maximum Lift
Maximum Overall Height, Bucket Raised
Rear Axle Center Line to Bumper
Wheel Base
Maximum Overall Length
Front Axle Centerline to Bucket Tip
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS
Ground to Top of Exhaust Stacks
Ground to Top of Hood
Ground to Center of Rear Axle
Ground to Fuel Tank Clearance
Ground to Lower Hitch Clearance
B-Pin Height at Maximum Lift
Rear Axle Center Line to Bumper
Wheel Base
Maximum Overall Length
Front Axle Centerline to Bucket Tip
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Electrical
-
- Alarm, back-up
- Alternator, single 145 amp
- Batteries, dry
- Converter, 10/15 amp, 24V to 12V
- Lighting system (halogen, work lights, access and service platform lighting)
- Starting and charging system, 24V
- Starter emergency start receptacle
-
- Operator Environment
-
- Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Rear vision camera system
- Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
- Controls, lift and tilt function
- Heater, defroster
- Horn, electric
- Instrumentation, gauges:
– Coolant temperature
– Fuel level
– DEF level
– Hydraulic oil temperature
– Power train oil temperature - Light, cab, dome
- Lunchbox, beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat belt minder
- Seat belt, retractable, 76 mm (3 in) wide
- STIC Control System
- UV glass
- Transmission gear indicator
- Wet-Arm wipers/washers (front and rear):
– Intermittent front and rear wipers - Lights, directional
-
- Power Train
-
- Cat Production Measurement ready
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain screens
- Crankcase guard
- Electro hydraulic parking brake
- Engine, C15 MEUI diesel, turbocharged/aftercooled
- Ground level engine shutoff
- Turbine precleaner, engine air intake
- Starting aid, ether, automatic
- Torque converter, Neutralizer
- Transmission, planetary powershift, 4F/3R electronic control
- Manual switch and automatic fuel priming
-
- Other
-
- Automatic bucket lift kickout/positioner
- Hydraulically driven demand fan
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Ecology drains for engine, radiator, hydraulic tank
- Fuel tank, 535 L (141 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, steering and brake filtration/screening system
- Cat Clean Emission Module
- Oil sampling valves
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- –50° C (–58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine block heater 120V or 240V
- High ambient cooling – software
- Cat Production Measurement
-
- Miscellaneous Attachments
-
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- Cold Weather Starting (extra two batteries)
-
- Other Optional Configurations
-
- Aggregate Handler
- Block Handler
-
- Operator Environment
-
- Cab powered precleaner
- Cat Detect Vision
- AM/FM/CD/MP3 radio
- Satellite Sirius radio with Bluetooth
- LED warning strobe
- CB radio ready
- Window pull down visor
- Handrail mounted mirrors
Contact Us
Get A Quote
Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.