Black banner

G3306B Oilfield Gas Generator Set

G3306B Oilfield Gas Generator Set

Production of oil and gas in remote oilfields can be a challenge when utility power is not available. The Caterpillar product line of oilfield gas generator sets provides the ideal solutions for this challenge. Engines are designed to run on low to no-cost well site gas without sacrificing on performance. These generator sets allow customers to significantly reduce fuel cost and avoid the expense and logistics of diesel fuel deliveries. Plus, they are designed to withstand the harsh conditions in the oilfield and feature a heavy-duty construction ideal for loading and unloading operations. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.G3306B oilfield gas generator set. Ratings: 151 bkW (203 bhp) @ 1800 rpm. Configurations available to meet NSPS emission standards in non-attainment areas and configurations available for non-regulated areas.

Engine Specifications

Maximum Rating

135 ekW (170 kVA)

Minimum Rating

110 ekW (138 kVA)

Emissions/Fuel Strategy

NSPS or non-regulated

Aspiration

Turbocharged-Aftercooled

Manifold Type

Watercooled

Bore

4.75in

Stroke

6in

Displacement

640in³

Engine Control and Protection

ADEM A4

Generator Set Control

EMCP 4.3 (4.4 optional)

Generator

SR4B

Frequency - Speed

1800 rpm

Capacity for Liquids

Fuel

CNG, LNG, field gas, natural gas

Lube Oil System - Refill

12gal (US)

Cooling System - Engine

5gal (US)

Dimensions

Length

60in

Width

38in

Height

50in

Weight

948lb

Standard Equipment:

  • Air Inlet System
    • Air cleaner — intermediate duty, dry
    • Air cleaner rain cap
    • Air cleaner service Indicator
  • Cooling System
    • High ambient radiator design for gas fuel applications
    • Side-by-side aftercooler and jacket water core
    • Metal top and bottom tanks
    • Coolant drain
    • Fan and belt guard
    • Coolant level sensor
  • Exhaust System
    • Exhaust manifolds — water cooled
    • Exhaust elbow and flex fitting — 127 mm (5 in)
    • Residential grade muffler
  • Fuel System
    • Gas pressure regulator — requires 82.7-172.4 kPa (12-25 psi) gas
    • Natural gas carburetor
  • Generator
    • Rated for continuous duty — 25% oversize
    • Class H insulation
    • Permanent magnet
    • Random wound
    • 240 VAC space heater
    • Coastal insulation protection
    • IP23 protection
    • Cat Digital Voltage Regulator
  • Control System
    • Electronic governing ADEM A4
    • Electronic diagnostics and fault logging
    • Momentary start/stop logic
    • High temperature braided engine harness with 70-pincustomer connector and service tool connector
  • Lube System
    • Crankcase breather, top-mounted
    • Oil filter, spin-on, left-hand service
    • Dipstick, left-hand service
    • Oil pump — gear-driven
    • Oil cooler
  • Mounting System
    • Heavy-duty welded steel base designed for the oilfield
    • Designed to accommodate a drop-over enclosure
    • Space claims for makeup tank and coalescing filter
    • Base design optimized for loading, transport, and unloading
  • Protection System
    • The following parameters include alarm and shutdown:
  • General
    • Jacket water heater
    • 24V starting motor
    • 24V, 45-amp charging alternator

Optional Equipment:

  • Exhaust System
    • Three-way catalyst
    • Critical grade muffler
    • Muffler mounting structure
  • Fuel System
    • Air-fuel ratio control
    • Coalescing filter, heavy-duty for wellhead gas

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.