18 Motor Grader
The 18 builds on the success of the 16 and offers additional power, a wider moldboard and the possibility to use a more aggressive blade angle, making it an ideal fit for mining operations that run 172-tonne (190-ton) or smaller trucks. The 18 enhances operational efficiencies by increasing coverage and reducing the number of passes required to complete the width of the road in certain applications. The 18 includes features that provide large benefits on operating cost reduction, uptime, performance improvements, and enhanced safety.
Engine
Base Power (1st Gear) - Net
Engine Model
Bore
Stroke
Speed at Rated Power
Optimized VHP Range - Net
Standard - Ambient Capability
Base Power (1st Gear) - Net - Metric
VHP Range - Net
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent
Standard - Fan Speed - Minimum
Emissions (1)
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent
Standard - Fan Speed - Maximum
Emissions (2)
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent
VHP Range - Net - Metric
Emissions (3)
Displacement
Number of Cylinders
Weights
Operating Weight - Typically Equipped
Moldboard
Blade Width
Arc Radius
Throat Clearance
Note
Down Force - Maximum GVW
Blade Pull* - Base GVW
Blade Pull* - Maximum GVW
End Bit - Width
Down Force - Base GVW
Cutting Edge Thickness
Thickness
Width
Cutting Edge Width
End Bit - Thickness
Height
Service Refill
Fuel Capacity
Cooling System
Hydraulic System - Tank
Hydraulic System - Total
DEF Tank
Engine Oil
Transmission - Differential - Final Drives
Tandem Housing - Each
Front Wheel Spindle Bearing Housing
Circle Drive Housing
Power Train
Forward/Reverse Gears
Transmission
Brakes - Parking
Brakes - Dynamic Brake Torque per Wheel
Brakes - Service
Brakes - Secondary
Hydraulic System
Circuit Type
Pump Type
Maximum System Pressure
Standby Pressure
Pump Output*
Note
Blade Range
Maximum Blade Position Angle
Maximum Lift Above Ground
Maximum Depth of Cut
Maximum Shoulder Reach Outside of Tires - Right
Circle Centershift - Right
Maximum Shoulder Reach Outside of Tires - Left
Moldboard Sideshift - Right
Blade Tip Range - Backward
Moldboard Sideshift - Left
Circle Centershift - Left
Blade Tip Range - Forward
Dimensions (Approximate)
Height - Exhaust Stack
Length - Between Tandem Axles
Length - Front Axle to Mid Tandem
Width - Tire Center Lines
Length - Front Axle to Moldboard
Length - Counterweight to Ripper
Height - Front Axle Center
Width - Outside Front Tires
Length - Front Tire to Rear of Machine - Including Tow Hitch
Height - Top of Cab
Ground Clearance - Rear Axle
Height - Top of Cylinders
Width - Outside Rear Tires
Standards
Sound
ROPS/FOPS
Brakes
Steering
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
Gear - Forward 1st
Gear - Forward 2nd
Gear - Reverse 2nd
Gear - Forward 4th
Gear - Forward 6th
Gear - Forward 5th
Gear - Forward 8th
Gear - Reverse 1st
Gear - Forward 3rd
Gear - Forward 7th
Gear - Reverse 3rd-6th
Optional Tire Arrangements
Wheel Group - 19.5×25 MP (2)
Wheel Group - 19.5×25 MP (1)
Wheel Group - 19.5×25 MP (3)
Wheel Group - 19.5×25 MP (4)
Wheel Group - 19.5×25 MP (5)
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
Gear - Forward 4th
Gear - Reverse 2nd
Gear - Forward 1st
Gear - Reverse 3rd-6th
Gear - Forward 3rd
Gear - Forward 5th
Gear - Forward 7th
Gear - Forward 2nd
Gear - Reverse 1st
Gear - Forward 6th
Gear - Forward 8th
Ripper
Shank Holder Spacing - Maximum
Shank Holder Spacing - Minimum
Ripping Depth - Maximum
Ripper Shank Holders
Penetration Force
Pry-Out Force
Machine Length Increase, Beam Raised
Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
Note (2)
Note (1)
Gross Vehicle Weight - Typically Equipped - Rear Axle
Gross Vehicle Weight - Base** - Total
Gross Vehicle Weight - Maximum Tested - Rear Axle
Gross Vehicle Weight - Maximum Tested - Front Axle
Gross Vehicle Weight - Typically Equipped - Front Axle
Gross Vehicle Weight - Base** - Front Axle
Gross Vehicle Weight - Maximum Tested - Total
Gross Vehicle Weight - Typically Equipped - Total
Gross Vehicle Weight - Base** - Rear Axle
Operating Specifications
Note
Forward - 6th
Forward - 2nd
Forward - 8th
Forward - 5th
Reverse - 3rd
Turning Radius - Outside Front Tires
Forward - 4th
Top Speed - Reverse
Forward - 7th
Articulation Angle - Left/Right
Reverse - 1st
Forward - 3rd
Reverse - 4th
Forward - 1st
Top Speed - Forward
Reverse - 6th
Steering Range - Left/Right
Reverse - 2nd
Reverse - 5th
Air Conditioning System
Air Conditioning
Frame
Front Frame Structure - Width
Front Axle - Height to Center
Circle - Diameter
Front Frame Structure - Thickness
Front Frame Structure - Height
Circle - Blade Beam Thickness
Drawbar - Width
Front Axle - Wheel Lean
Front Axle - Total Oscillation per Side
Drawbar - Height
Tandems
Sidewall Thickness - Outer
Sidewall Thickness - Inner
Tandem Oscillation - Front Up
Tandem Oscillation - Front Down
Height
Width
Drive Chain Pitch
Wheel Axle Spacing
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- Adjustable electric arm rest
- Adjustable wrist rest
- Air conditioner with heater
- Air horn
- Articulation, automatic Return-to-Center
- Centershift pin indicator
- Coat hook
- Cup holder
- Display, digital speed and gear
- Doors, left and right side with wiper
- Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine RPM, and hydraulic oil temp)
- Gauges, machine level
- Information display touch screen
- Joystick gear selection
- Joystick hydraulic controls for implements, steering, transmission
- Ladders, cab, left and right side
- Lights, left and right side lights
- Lights, night time cab
- Meter, hour, digital
- Mirror, inside rearview, wide angle
- Power port, 12V
- Radio ready, entertainment
- ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
- Seat, cloth-covered, comfort air suspension
- Storage compartments
- Throttle control, electronic
-
- Power Train
-
- Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
- Air-to-air after cooler (ATAAC)
- Auto Diff Lock
- Belt, serpentine, automatic tensioner
- Brake wear indication
- Brakes, oil disc, four-wheel, hydraulic
- Consistent power to ground
- Critically Low Fluid Level Monitoring System
- Differential, lock/unlock
- Drain, engine oil, high speed
- Electronic over speed protection
- Engine ECO Mode: Tier 4 Final/Stage V/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
- Engine, compression brake
- Ether starting aid
- Fuel tank, fast fill, ground level
- Fuel-water separator
- Hydraulic Demand Fan
- Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) equivalent and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards
- OK-to-Start
- Optimized VHP
- Parking brake – multi disc, sealed, oil-cooled
- Priming pump, fuel
- Rear axle, modular
- Sediment drain, fuel tank
- Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) equivalent or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards.
- Transmission, 8F/6R, power shift
- VIMS no telematics
-
- Guards
-
- Front axle cylinder guard
- Transmission guard
-
- Electrical
-
- Alternator, 150 ampere, sealed
- Batteries, maintenance free, heavy duty, 1,400 CCA
- Breaker panel
- Electrical system, 24V
- Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
- Product Link
- Starter, electric, heavy duty
-
- Safety
-
- Alarm, back up
- Ground level engine shutdown
- Hammer (emergency exit)
- Horn, electric
- Lockout, hydraulic implement for roading
- Operator not present monitoring system
- Paint, glare reducing – top of front frame, rear enclosure and ripper cylinders
- Rearview camera
- Seat belt indicator
- Seat belt, retractable 76 mm (3 in)
- Secondary steering
- Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (two)
- Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
- Light, LED, warning strobe
- Lights front LED
- Lights, front headlights high
- Lights, front headlights low
- Mounting, for warning light
- Service lights
- Working lights Halogen
- Working lights LED
-
- Other Standard Equipment
-
- 3-bolt blade bracket
- AccuGrade ARO
- Accumulators, blade lift
- Brake accumulators, dual certified
- Cat Grade Control Cross Slope
- CD ROM Parts Book
- Clutch, circle drive slip
- Cutting edges, flat DH-2 steel: – 254 mm × 35 mm (10 in × 1.4 in) – 19 mm (3⁄4 in) mounting bolts
- Doors (four), engine compartment, (two left, two right hand) locking
- Doors, two service, left and right side
- Drawbar – six shoe with replaceable wear strips
- End bits, 16 mm (5⁄8 in) DH-2 steel, 19 mm (3⁄4 in) mounting bolts
- Fast fill fuel 567.8 L/min (150 gpm)
- Fluid check
- Frame, articulated, with safety lock
- Hydraulics, load-sensing
- Metallic fuel tank, 496 L (131 gal)
- Metallic DCM wear strips
- Modular cooling package
- Moldboard: – 5.5 m × 787 mm × 25 mm (18 ft × 31 in × 1 in) – Hydraulic side shift and tip
- Radiator, two cleanout access doors
- Rear bumper
- Rear tandem access steps and hand bars
- S·O·S ports: engine, hydraulic, transmission, coolant
- Tandem walkway
- Top adjust circle wear strips
- Fire suppression ready
- Ripper, rear
- Push block, counterweight
-
- Work Tools/g.e.t.
-
- 5.5 m (18 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 13⁄8 in)
-
- Tires, Rims, And Wheels
-
- A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
-
- Fluids
-
- Extended Life Coolant to –35° C (–31° F)
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- Comfort package
- Heated door
- Mirrors high visibility
- Mirrors, outside heated 24V
- Mirrors, outside mounted
- Seat heated
- Seat heated/ventilated
- Windows cleaning platform and ladders left-right hand side
-
- Power Train
-
- Transmission, autoshift
-
- Guards
-
- Debris guard
- Rear fenders
- Sound suppression, engine enclosure and transmission
-
- Safety
-
- Additional monitor for rearview camera
- Enhanced access platform
- Machine Security System Key
- Service access platform
-
- Other Attachments
-
- Auto-lube, Centro-matic
- Auto-lube, ripper enhancement
- Control, blade, variable float
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- Hydraulic arrangements with additional hydraulic valves Base+1
- Hydraulic arrangements with additional hydraulic valves Base+5
- Product Link Elite dual
- Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
- Weather, Cold Plus package
-
- Work Tools/g.e.t.
-
- 5.5 m (18 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
- Tooth, ripper
-
- Fluids
-
- Coolant, –51° C (–60° F)
Contact Us
Get A Quote
Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.