Black banner

C18 ACERT Tier 4 Final

C18 ACERT Tier 4 Final

Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Final or EU Stage IV emissions certifications land mechanical drilling equipment such as mud pumps. Cat C18 ACERT™ Industrial Diesel Engine. Ratings: 429-470 bkW (575-630 bhp)@ 2000 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Ratings 563-597 bkW (755-800 bhp) @ 1800 rpm are designed to meet U.S. EPA Tier 4 Final emission standards.

Engine Specifications

Maximum Rating

800BHP

Emissions

U.S. EPA Non-road Tier 4 Final

Displacement

1104in³

Minimum Rating

755BHP

Bore

5.7in

Stroke

7.2in

Rated Speed

1800r/min

Aspiration

Turbocharged-Aftercooled

Governor and Protection

ADEM A4

Engine Weight - Net Dry

3482lb

Oil Change Interval

250 - 500

Rotation from Flywheel End

Counterclockwise

Flywheel and Flywheel Housing

SAE No. 0 or SAE No. 1

Flywheel Teeth

136 (SAE 0), 113 (SAE 1)

Capacity for Liquids

Minimum Cooling System - Engine Only

7.1gal (US)

Dimensions

Length

60.2in

Width

37.8in

Height

51in

Standard Equipment:

  • Air Inlet System
    • Turbocharged Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump
  • Exhaust System
    • Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)
  • Flywheels And Flywheel Housing
    • SAE 0 and SAE 1 flywheel housing
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)
  • Power Take Off
    • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow; vibration damper; lifting eyes

Optional Equipment:

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.