Black banner

C4.4 (Electronic Control System)

Power Rating

Power Range

71/81/108/129 bkW @ 1800 rpm, 71/86/108 bkW @ 1500 rpm

Dimensions & Weights

Length

33.7in

Height

40.9in

Minimum Width

30.6in

Maximum Width

32in

Minimum Engine Dry Weight

1200lb

Maximum Engine Dry Weight

1278lb

Engine Specifications

Configuration

In-line 4, 4-stroke-cycle diesel

Emissions

U.S. EPA Tier 3 certified, EU Stage V certified

Rated Engine Speed

1500/1800 rpm

Bore

4.13in

Stroke

5in

Displacement

268in³

Aspiration

Turbocharged-aftercooled and turbo only aspiration (Turbocharged aspiration only for 65ekW (71bkW))

Governor

Electronic (A5 ECM)

Refill Capacity

Lube Oil System w/Oil filter change: 11 L 2.8 gal)

Oil Change Interval

500 hrs

Cooling

Heat exchanger, combined circuit keel cooling, or separate circuit keel cooling

Flywheel Housing

SAE No. 03 with SAE 11.5 flywheel (126 teeth)

Standard Equipment:

  • Cooling System
    • Gear-driven jacket-water and auxiliary water pumps
    • Engine mounted air cleaner and expansion tank
    • Integral plate-type oil cooler
  • Exhaust System
    • Watercooled exhaust manifold and turbocharger
  • Fuel System
    • Common Rail fuel system
    • Electric fuel priming pump
  • General
    • Internal engine balancing shaft
    • Self-tensioning multi-vee belt drive
  • Lube System
    • Open crankcase ventilation system
  • Mounting System
    • Engine mounted fuel and oil filter
    • Engine mounted customer interface and control relays
  • Starting System
    • 12V or 24V starter motor

Optional Equipment:

  • General
    • MGGP 200 Gauge Panel and interface harness
    • Engine shutdown sensors and shutdown controller
    • Double wall high pressure fuel lines
    • EMCP engine control panel
    • Exhaust elbow and bellows
    • Rear mounting feet
    • Glow plugs
    • Jacket water heater
    • Jacket water connections (keel cooled)
    • SOSSM sample points
    • Glow plugs

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.