920 Compact Wheel Loader

The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Share Print Download PDF View Rental Options Apply For Credit

Engine

Maximum Gross Power

121hp

Rated Net Power - Rated Engine Speed

2200r/min

Maximum Gross Power - Rated Engine Speed

2200r/min

Rated Net Power - SAE J1349

120hp

Maximum Gross Power - ISO 14396 (metric)

122hp

Rated Net Power - ISO 9249

118hp

Maximum Gross Torque - SAE J1995

372ft·lbf

Maximum Gross Torque - ISO 14396

369ft·lbf

Maximum Net Torque - SAE J1349

366ft·lbf

Maximum Net Torque - ISO 9249

363ft·lbf

Displacement

220in³

Bore

3.85in

Stroke

4.72in

Engine Model

Cat C3.6

Emissions

Engine meets Tier 4 Final/Stage V emission standards.

Note

Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Maximum Gross Power - ISO 14396

121hp

Weights

Operating Weight

21742lb

Buckets

Bucket Capacities

1.3-3.5 m3 (1.7-4.6 yd3)

Bucket Capacities - General Purpose

1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities - Light Material

2.5-3.5 m³ (3.3-4.6 yd³)

Sustainability

Recyclability

95%

Service Refill Capacities

Transmission

0.8gal (US)

Engine Crankcase

2.6gal (US)

Axles - Rear

4.5gal (US)

Hydraulic System - Including Tank

25.9gal (US)

Cooling System

5.7gal (US)

Fuel Tank

43.6gal (US)

Hydraulic Tank

14.5gal (US)

Note

DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Diesel Exhaust Fluid (DEF) Tank

4.8gal (US)

Axles - Front

4.5gal (US)

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005

Note (3)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (4)

*The measurements were conducted with the cab doors and windows closed.

Loader Hydraulic System

Maximum Flow - Implement Pump

43.6gal/min

Relief Pressure - Tilt Cylinder

4641psi

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard

25gal/min

Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure

4641psi

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level

2.7s

Note

All cycle times listed are with cylinder snubbing turned off.

Maximum Working Pressure - Implement Pump

4061psi

Hydraulic Cycle Time - Total Cycle Time

11.5s

Hydraulic Cycle Time - Rackback

2.2s

Hydraulic Cycle Time - Dump, at Maximum Reach

1.8s

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift

4.8s

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High

40gal/min

Maximum Flow - Implement Pump - 4rd Function, Maximum Flow

25gal/min

Steering

Maximum Working Pressure - Steering Pump

3190psi

Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed

2.3s

Steering Articulation Angle - Each Direction

40°

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.4turns

Maximum Flow - Steering Pump

21.7gal/min

Transmission

Note

*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Forward and Reverse - Speed Range 3

25mile/h

Forward and Reverse - Speed Range 2*

12.5mile/h

Forward and Reverse - Speed Range 1*

6.3mile/h

Axles

Rear

Oscillating ±11 degrees; Locking differential (standard)

Front

Fixed; Locking differential (standard)

Tires

Other Choices Include

17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid

Standard Size

17.5 R25 L2 XTLA

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Standard Equipment:

Optional Equipment:

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

Make

Model Number

First Name*

Last Name*

Business Name*

Email Address*

Phone Number*

Address*

City*

State*

Zip*

Comments

true I agree to all the terms and conditions

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.